Blog

We'll replace the steering bearing. With the wheel removed, the action was quite stiff and made a grinding sound. When disassembled, there's plenty of lubric...

Left and right master cylinders, brake and clutch hoses, and OHLINS steering damper installation. We've been using the S50 tank as the standard lately. We we...

The customer requested installation of an oil-cooled slipper clutch. We removed the standard clutch. There's some discoloration from heat. Every time I work ...

The bike was in beautiful condition, so we proceeded with meticulous care. We checked the condition of the steering stem. It had been disassembled not long a...

CB1100 SC65 A recently fascinating air-cooled 18-inch bike infused with 21st-century technology. The lever area is well lubricated and in reassuring conditio...

Triumph Daytona 675R Oil, Coolant, and Fluid Change We drain the oil. We drain the coolant. That subtle shine—is it residue? It's not brown, so it's not engi...

GSXR1100L Carburettor Maintenance (+) OH When replacing the starter valve, apply just a little lubrication. When assembled, it looks like this. The return is...

GSXR1100L Carburettor Maintenance (+) OH　 First we do a rough cleaning, then we disassemble it. The inside was clean. We're grateful when it's in this condi...

Bandit 1200 Oil-cooled maintenance Quite a bit of abnormal noise. The damper was clicking and falling apart, causing rattling. This is the first time I've se...

Digital temperature meter installed. We trial and error every time on how to make it lighter and stronger. It's sad to just slap a sheet metal piece on there...