Deco-mainte– tag –

Now the exhaust pipe can be secured normally again, so we're relieved. Let's move on to maintenance. It won't turn by hand at all. I think every time how it'...

This is one of those jobs we'd like to do if we could. It's pretty risky. Thankfully there are plenty of them. Bolt extractors, double nuts, stud pullers—non...

Let's do carburettor maintenance + OH and cosmetic polishing. We're satisfied with a finish that's better than new. If you keep an eye on the float valve O-r...

The tank was extremely rusty, so we also performed rust removal and fine coating treatment. The inside of the carburetor was completely covered in rust. Wate...

The wheel bearings and seals have arrived, so let's install them. The double-sided seals resist grease leakage and maintain a clean, non-oily condition. The ...

The FZR1000 3GM—looking at it now, it has a fresh yet nostalgic design that's really nice. The steering is a bit off, so I'll adjust it. Time to check the co...

Reuse and machining, etc. I'll grind it down and weld it up. The shift rubber from a Suzuki GSX-R1100K-N is a bit stiff and feels great. The tip is finished ...

Sharp, really sharp… The clutch is incredibly stiff, so we're replacing it. We'll also disassemble, clean, and oil the release to reset it. Let's clean and o...

Since it's been a while since we've run it, let's keep things within budget and not too painful. Starting from the front. The wheel bearings are still good t...

The inspection has already been completed, so we're proceeding with the work. Inspection, Deco-mainte, carburettor maintenance + OH, and new tech oil change ...