Electrical system– tag –

Just wiping the chain is enough to get it plenty clean. Let's do some self-point maintenance. The control systems around the levers. When they're lubricated,...

Let's clean the carburetor. Surprisingly, dirt has accumulated on the inner walls as well.   A clogged carburetor has dirt firmly stuck to its inner wal...

Z1000R1 Flat-Rate Motorcycle Inspection, Carburettor Maintenance, Self-Point Maintenance, MOSFET Regulator, and more on the job. The regulator sits under the...

We received a request to install an OP sensor and LED unit on a GSX-R1100J H2 master tank and more. We're connecting an oil pressure sensor to the Active met...

It's been a while. The final details take more time than installing the big parts. USB port – honestly, I could only find disappointing options. Changing my ...

Let's replace the Watanabe/Okada V+ main harness and so on. If you plan to keep the bike for a long time, it's better to do this work while you can still get...

Bandit 1200K1 inspection—cam, carburettor maintenance, Watanabe, Okada boost circuit, harness replacement, and more. Let's start by swapping out the cam. Mol...

Let's install the Plasma V Plus (16V).   Before installation, you need to measure the amperage per coil (one at a time). The Plasma V Plus (16V) toleran...

Let's replace the wheel bearings. Replacement isn't the end of it—you need to adjust them after they've broken in. The front oil condition is excellent. Oil ...

Recently we've been offering a polishing service (for a fee) to refresh parts as well. We're always researching, so please feel free to consult with us. Firs...