Z [Air-cooled]– tag –

Convenient products are being sold these days. It contacts the meter bracket, so I'll grind it away. Attaching and removing it is a hassle with the wiring ge...

We've received a request for the ever-popular H2 master tank bracket fabrication and digital temp gauge installation. I knew about it from the previous owner...

The existing setup was disappointing, and we agreed it needed to be replaced, so let's make a new one. We fabricated a mounting bracket to secure the TEE-FIT...

Let's install the GALE SPEED master and brake master. Before that, I'll clean the calipers. Since the pads are worn down, let's replace them. The caliper ope...

Just wiping the chain is enough to get it plenty clean. Let's do some self-point maintenance. The control systems around the levers. When they're lubricated,...

Let's clean the carburetor. Surprisingly, dirt has accumulated on the inner walls as well.   A clogged carburetor has dirt firmly stuck to its inner wal...

Z1000R1 Flat-Rate Motorcycle Inspection, Carburettor Maintenance, Self-Point Maintenance, MOSFET Regulator, and more on the job. The regulator sits under the...

Reuse and machining, etc. I'll grind it down and weld it up. The shift rubber from a Suzuki GSX-R1100K-N is a bit stiff and feels great. The tip is finished ...

Sharp, really sharp… The clutch is incredibly stiff, so we're replacing it. We'll also disassemble, clean, and oil the release to reset it. Let's clean and o...

Since it's been a while since we've run it, let's keep things within budget and not too painful. Starting from the front. The wheel bearings are still good t...