Z [Air-cooled]– tag –

Let's do a Deco-mainte and NUTEC oil change. The spark wasn't firing at all, but once we cleaned it, it's firing great. The other cylinders are also firing p...

The tank cap has arrived, so we're moving forward with the rest of the work. It's nice when the key is the same—and honestly, everyone feels that way. Since ...

The tank rust removal and fine coating are complete, so let's go ahead and swap it out. We're changing from 19×20 to 19×18-20. The 19×20 turned out to be a b...

NGC Hand-Bent Full Exhaust + Ceramic Coat GPZ750 As always, the hand-bent craftsmanship creates a stunning aesthetic. The finish features a heat-resistant ce...

I took it out for a test ride first thing in the morning and got some shots of the exhaust. Overall view: the tailpipe isn't too long or too short, and the s...

AS Uotani unit replacement. I was amazed to see it was still attached with double-sided tape. It's better to install parts with removal in mind. This time I ...

Let's install the Z1000A1 NGC exhaust. The hand-bent gentle radius is really beautiful. The installation accuracy is excellent, and it's an exhaust you can i...

Let's install the crankcase breather parts "T-REV" cleanly. We bend the stainless steel pipe with a bender, working it gradually. It's quite high-performance...

Let's install the NGC full exhaust. During the oil change, I also polished the filter cover to clean it up. It'll feel great going forward. I ordered the dra...

The NGC hand-bent iron full exhaust with Cerakote has arrived. The timing worked out perfectly, and it was delivered quickly. NGC-JAPAN This time, we had Cer...