デコボコ– Author –

GPZ750 Battery Charge D.I.D ZVM-X & Sunstar Service Kit + request. We investigated why the voltage was dropping. We confirmed the generated voltage and c...

Bandit 1200 NUTEC oil change and various adjustments requested. We replaced it with a customer-supplied Sunstar rear disc. The caliper wasn't very dirty, but...

The engine wouldn't start, so we picked it up. A large amount of fuel had leaked into the crankcase, and it took considerable time to drain and flush it. The...

We received a request to install PIAA LED headlight bulbs on a GSF1200. A reassuring package. Since these are for four-wheel vehicles, they come with two bul...

GSXR1100N main harness replacement and more work requested. We remove everything that can be taken off and move forward all at once. Bypass modifications, no...

Inazuma 1200 Flat-Rate Motorcycle Inspection Deco-mainte request. We've done almost all the maintenance, so the condition is excellent. Work progresses quick...

46 mm upright fork. You should know the inner tube outer diameter, metal outer diameter, and bottom case inner dimensions. Despite not having been serviced i...

Let's perform front maintenance on the SKF. These days, matching upper and lower sizes seems to be the standard. This was my first time encountering a top br...

SV1000 Flat-Rate Motorcycle Inspection Front Maintenance SKF Fluid Replacement request. It's in pretty good condition. You'll want to replace it once a year....

Let's disassemble the caliper. Always inspect the pistons and seals. We've had cases where the wrong seals got mixed in before. Inspecting this too gives you...