デコボコ– Author –

PAMS High-Performance Fuse System · MOSFET Regulator· NUTEC Oil Change request. The MOSFET regulator has a large surface area and generates little heat, maki...

GSX1100S inspection and Deco-mainte service request. The throttle area was well maintained and looked clean. Both levers feel good. Rather than applying oil ...

Let's disassemble the front fork. There's a little dirt, but it's in relatively good condition. It's fortunate that this fork doesn't require cylinder disass...

The customer reported an odd feeling in the steering and requested front maintenance plus SKF & A.S.H. overhaul. The condition isn't very good. First off...

The customer requested carburettor maintenance along with the motorcycle inspection. The ZRX1100 is a lightweight classic bike. It looks current because of t...

Inspection, brake maintenance (front only), stainless steel brake hose, master cylinder replacement, and various inspections were requested. The caliper hasn...

We performed the fabrication and installation work. It was located on top of the top bridge with poor visibility, so we relocated it on our own. It was wired...

We'll continue with the oil-cooled maintenance work. The condition was excellent, as the mileage is still low. The engine damper shows minimal wear, which is...

Let's disassemble the carburetor. The image shows it after polishing, so it's finished in excellent condition. It's in such good condition that you can feel ...

Now we move on to work on the rear area. The condition looks good. We could reuse them, but we'll replace everything together and reset it. During a trial as...