Blog

Let's fabricate a SUS mesh hose. I think everyone has different thoughts about SUS mesh hoses. Usually, people are satisfied if the stock hose becomes mesh. ...

I forgot that switching to a radial master would contact the meter bracket… I could restrict the steering angle, but there's not much clearance left before t...

We've been asked to work on a GSX-R750 GR71F with a Brembo RCS master, Brembo caliper, and SUS mesh hose fabrication. We're reusing parts from before. We'll ...

GSX-R1100N inspection and rear maintenance work. Bikes from this era have plenty of grease packed in and are built tough. My camera has been acting up lately...

Let's do carburettor maintenance + OH and cosmetic polishing. We're satisfied with a finish that's better than new. If you keep an eye on the float valve O-r...

The tank was extremely rusty, so we also performed rust removal and fine coating treatment. The inside of the carburetor was completely covered in rust. Wate...

The EK chain links took a while to come in, so work was on hold. Coolant should ideally be changed at least once every two years. Since it goes through const...

Let's do some self-service point maintenance. You can choose to do it yourself or let us handle it. Here's what we did this time: • Fluid replacement 2 point...

Here's another rare Bandit 650 coming in for inspection, oil-cooled maintenance, and self-point maintenance. I think there's nothing that improves performanc...

Let's perform rear maintenance. Well, the oil content was in good shape. We'll replace the link bearings. At that time, we should also replace the inner slee...