Chassis Total Maintenance– tag –

Let's disassemble the front fork. The oil condition is about average in terms of contamination. Modern forks really do move well, but they also stay cleaner....

Chassis total maintenance—let's service the front end. This is the stem bearing. The condition was excellent. It's remarkable that Suzuki has used the same b...

Since the bottom case and other parts show severe corrosion, we're also handling polishing work to improve the appearance overall. The corrosion has progress...

GSX1400 chassis total maintenance request. This is the work of maintaining all the bearings, chain, and sprockets around the vehicle body. We proceed with th...

Let's disassemble the caliper. Always inspect the pistons and seals. We've had cases where the wrong seals got mixed in before. Inspecting this too gives you...

The bottom case machining is complete, so let's assemble the fork. When we disassembled it, the condition was extremely poor. At first I thought maybe it had...

Let's replace the wheel bearings and so on. There isn't much wear, but occasionally we find oddly modified parts, so this is an area we need to pay close att...

This GSF1200 shows signs of wear throughout. Let's inspect each component and clean it up. The steering stem shows no signs of previous disassembly, but it's...

We performed the fabrication and installation work. It was located on top of the top bridge with poor visibility, so we relocated it on our own. It was wired...

We'll continue with the oil-cooled maintenance work. The condition was excellent, as the mileage is still low. The engine damper shows minimal wear, which is...