Deco-mainte– tag –

I'll skip some of the carburettor maintenance details. Now that the fuel level adjustment is complete, I'll reassemble it. I'll replace the rubber parts whil...

If I update halfway through, I have to read back to see how far I've gotten. It's no good if I skip even once. This isn't a recent part. I'll re-oil the wire...

For now, I'd like to progress as far as I can. Since we're removing the wheels, let's clean the chain slider and the area under the case while we're at it. I...

It had been sitting for a little over two years. Motorcycles really do deteriorate quickly when they're not being ridden. First up: carburettor disassembly a...

If you leave it sitting, it gets bad fast. This one's pretty rough. All the jets are shot, and the needle valve is completely gone too. The needle won't come...

Let's perform oil-cooled maintenance. First, we'll do the prep work. Since we're always improving our process year after year, it's definitely better to requ...

We see a lot of Unicorn-made Inazuma 1200 oil-cooled Katanas. This one came in for inspection, Deco-mainte, oil-cooled maintenance, and Newtech oil change. T...

I finally got to use the eel voucher I'd been given. Let's make sure the ETC power is easy to identify later. The generator looks fine. The mirror was loose,...

Let's continue. It's looking much cleaner already. Bent the bracket ETC antenna mounting. Bent the bracket ETC lamp mounting. Made a front patch for the uppe...

The parts have arrived, so let's get them installed. The Coken brake pad pins are cheaper than the Brembo standard and look nicer with their titanium coating...