Vehicle Inspection– tag –

First valve clearance adjustment after engine overhaul. We don't do engine work anymore, but when we did, we would re-adjust at 500 kilometers after running....

The frame was sitting too low, so let's raise it up. First, here's the failed attempt.   I carelessly cut V-grooves on the inside and outside, prepared ...

The wiring continues on and on... A little trick: if you lightly sand the bulb socket and then solder the ground connection, you won't need a shared ground a...

Inspection is what we do best, so we'll zip through that and move on to maintenance. The speed wire gets a good oiling now and then.   Wipe it down insi...

Check the main ground wire from time to time.   This is the main ground wire. It's quite important, so it's a part worth replacing after a certain perio...

Mostly JB-1. Modern aluminum wheels are so light! Aftermarket wheels generally have the air valve positioned nicely. Tires are BT-016 PRO. Both front and rea...

There was a parts ordering mix-up, so I'm assembling the carburettor partway through. Since cylinders 1-4 and 2-3 have separate fuel supply, it's pretty stra...

Let's fabricate an inner fender.   It's SUS304-HL, but if we let it float freely, we'll be safe. I didn't have confidence making it in one go, so I fabr...

Today we're fabricating a battery case and electrical plate. Nothing particularly special about the finish. It's an ordinary shape, and I apologize for that....

Let's get some fabrication work done. The customer requested to open up the space under the seat (a scooter-style tune). Since the MOSFET regulator is large,...