デコボコ– Author –

Let's give that carburettor a good cleaning. Since this is OEM carburettor maintenance, we don't disassemble all four carburetors completely—it's a different...

We've been asked to do OEM carburettor maintenance. First, we'll replace the intake manifold. The oil-cooled intake manifold shape is somewhat unusual. Once ...

Inspection and various small jobs. Polishing alone left some unevenness and a plastic-like appearance, so we went with hairline finish followed by re-polishi...

Even without the relay installed, the gauge swings all the way—what a thrill! (;ﾟ∀ﾟ)=3 Panting! That's the spirit. The generator connector had melted. I'm am...

Let's continue with the main harness and some minor modifications. The horn doesn't have a place to go, so we're relocating it. We'll proceed in the least co...

Inspection, DID Sunstar Chain Kit, self-point maintenance request.   This is one of our go-to standard jobs. I think the most effective way to lighten t...

This is work from a little while back. The customer requested an inspection, oil change, and maintenance. Spark plugs can be replaced at regular intervals of...

GSXR1100K—still shiny and in scary good condition. We're taking it nice and slow, masking and protecting every step of the way.   We've brought in a tir...

Fine work—minor modifications. It takes more time than you'd think. When the bike leans too far on the sidestand, it takes a real effort to stand it up—a pai...

Man, it's so hot out there! What's going on? Motorcycles break down in this heat, seriously. Continuing on. The slide valve looks like it's still holding up ...