Everyday Events (Work Log)– category –

Front maintenance (stem+) request. (This time there will be no fork oil change.) I checked inventory and found an upper seal in stock. Since no one else seem...

While we're at it, let's check the clutch too. Given the mechanism, some play is bound to develop—it's unavoidable. Both the hub and sleeve contact are gentl...

Let's start by taking it apart to see what we're working with. The fork was all bent up and wouldn't come out. The stem is bent too. I pulled it out anyway, ...

I'm going to continue from yesterday. After much deliberation, I decided to go with a mechanical switch instead of hydraulic. If the hydraulic keeps having l...

The Sportster 1200 parts have arrived, so let's get them installed. The rear brake feel is off and the stopping power isn't great, so I'll clean the seal-rel...

Let's replace the tires. We'll clean the pro-arm contact surface and install it properly. After cleaning. The front didn't have much paint peeling. The rear ...

Gasoline wouldn't stop leaking, so it came in on a flatbed. The customer also requested an inspection at the same time. (As a general rule, we don't accept w...

Honda CRF250 power outlet installation and some maintenance work. (As a general rule, we do not accept work on bikes and scooters without inspection certific...

GSX1100S D.I.D ZVM-X& Sunstar Service Kit + tire change and more on the agenda. First, let's start by removing the parts. The wheels have been changed to...

I took it out for a test ride first thing in the morning and got some shots of the muffler. Overall view: the tailpipe isn't too long or too short, and the s...