Vehicle Inspection– tag –

The fuel tank has also come back from rust removal. Just like the floor, the ceiling is important too. I was worried that the internal partition might preven...

Let's continue from yesterday. The rear caliper looks pretty rough, but surprisingly the pistons are only corroded on the outside. The operation seems fine. ...

Hmm... the corrosion is pretty severe. We're already running into trouble. The power of rust is amazing... really. Nature's own threadlocker. We'll polish it...

This is an inspection and maintenance request. Since I don't particularly enjoy opening and closing things constantly, I selected the areas that needed atten...

The parts have arrived, so let's finish it up.       The 90-degree vent is very awkward with RCS. The basic principle that applies to all hose...

Let's install the brake hose neatly to match the motorcycle. Just because it's a mesh hose doesn't mean you can force it to bend at nearly 90 degrees. First,...

Installing the Brembo master cylinder. But first, a bit of prep work. Steering lubrication and adjustment. It doesn't look like this has ever been disassembl...

The stainless steel exhaust had corroded and looked shabby, so we gave it a fresh coat of paint. The coating is so thin you can see the welding beads through...

With new parts, we take care to cover them securely. We aim to keep everything in pristine condition with zero damage. I have to admire people who can just g...

The inspection is complete, so we're moving forward with the clutch hose and everything else. It came out clean and simple. We deliberately went for a good a...