Carb Maintenance– tag –

It's finished to better-than-new condition. Really satisfying to see. Regular cotton swabs work fine, but using industrial ones and cleaning the inside too i...

My GS1000S has been using a Mikuni BST36 vacuum carburetor for years. This one is from a GSF1200. Since the engine hasn't been started in so long, the carbur...

The engine wouldn't start, so we picked it up. A large amount of fuel had leaked into the crankcase, and it took considerable time to drain and flush it. The...

The customer requested carburettor maintenance along with the motorcycle inspection. The ZRX1100 is a lightweight classic bike. It looks current because of t...

We performed the fabrication and installation work. It was located on top of the top bridge with poor visibility, so we relocated it on our own. It was wired...

We'll continue with the oil-cooled maintenance work. The condition was excellent, as the mileage is still low. The engine damper shows minimal wear, which is...

Let's disassemble the carburetor. The image shows it after polishing, so it's finished in excellent condition. It's in such good condition that you can feel ...

Now we move on to work on the rear area. The condition looks good. We could reuse them, but we'll replace everything together and reset it. During a trial as...

GSX-R750 RK chassis total maintenance, oil-cooled maintenance, carburettor maintenance (+) OH and more work requested. We'll start with the front area. The c...

GSX750S carburetor maintenance. It's been running for 150,000 kilometers, so I'm curious to see what condition it's in. Number one in dirtiness. Tank has rus...