Z [Air-cooled]– tag –

We've decided on the CP3369 for the front caliper. When it comes to selecting a brake caliper, here's how we think about it… • Repair kits and OH (overhaul) ...

This is a personal machine project. With the abundance of parts and popularity. I hope it will turn out in a way that hasn't been seen before. With limited t...

The fuses blow from time to time, so let's check it out. Since some time has passed, I'm going to go through everything from front to back. I really hate sha...

Almost done.   The oil seepage from the alternator is pretty bad, so we're replacing the rubber and applying liquid gasket. Degreasing and roughing up t...

D.I.D ZVM-X& Sunstar service kit, and you can choose between RK and EK. This time it's a Steed. What's this? Signs of the chain rubbing. It doesn't show ...

First valve clearance adjustment after engine overhaul. We don't do engine work anymore, but when we did, we would re-adjust at 500 kilometers after running....

The frame was sitting too low, so let's raise it up. First, here's the failed attempt.   I carelessly cut V-grooves on the inside and outside, prepared ...

The wiring continues on and on... A little trick: if you lightly sand the bulb socket and then solder the ground connection, you won't need a shared ground a...

Mostly JB-1. Modern aluminum wheels are so light! Aftermarket wheels generally have the air valve positioned nicely. Tires are BT-016 PRO. Both front and rea...

Let's fabricate an inner fender.   It's SUS304-HL, but if we let it float freely, we'll be safe. I didn't have confidence making it in one go, so I fabr...