Z [Air-cooled]– tag –

D.I.D ZVM-X& Sunstar service kit, and you can choose between RK and EK. This time it's a Steed. What's this? Signs of the chain rubbing. It doesn't show ...

First valve clearance adjustment after engine overhaul. We don't do engine work anymore, but when we did, we would re-adjust at 500 kilometers after running....

The frame was sitting too low, so let's raise it up. First, here's the failed attempt.   I carelessly cut V-grooves on the inside and outside, prepared ...

The wiring continues on and on... A little trick: if you lightly sand the bulb socket and then solder the ground connection, you won't need a shared ground a...

Mostly JB-1. Modern aluminum wheels are so light! Aftermarket wheels generally have the air valve positioned nicely. Tires are BT-016 PRO. Both front and rea...

Let's fabricate an inner fender.   It's SUS304-HL, but if we let it float freely, we'll be safe. I didn't have confidence making it in one go, so I fabr...

Today we're fabricating a battery case and electrical plate. Nothing particularly special about the finish. It's an ordinary shape, and I apologize for that....

Let's get some fabrication work done. The customer requested to open up the space under the seat (a scooter-style tune). Since the MOSFET regulator is large,...

I cut about thirty cable ties to clean up the wiring—they're convenient, but moderation is best.   The wiring is so dense it's almost dizzying to look a...

The fork and stem corrections have come back, so let's move forward. It got lightly bumped into a street tree, so it needed repair. The inner tube that bent ...